BG1 series

BG1

Sweeps and scrubs in one pass with 75 L of clean water, built for large open floors.

2,000 m²/hMax covered cleaning
75 L + 60 LClean and waste water
7.5 hMax sweep & scrub run-time

Request a Walkthrough

BG1 large autonomous scrubber-dryer robot

Two BG1 series scrubber-dryer robots in a studio setting

Overview

What this robot is for

The BG1 combines a sweeping roller and a scrubbing deck so debris pickup and wet scrubbing happen in a single pass. With a 550 mm scrub path, up to 7.5 hours of run-time and an optional all-in-one station for refilling, draining and charging, it is designed for supermarkets, malls, warehouses and other large hard-floor areas.

Floors. Hard floors: tile, polished concrete, epoxy, stone and similar sealed surfaces.

Capabilities

One-pass sweep and scrub

Front sweeping and rear scrubbing in a single workflow with smart detergent dosing, strong down-pressure and a wide path.

Extendable edge cleaning

The scrub brush physically extends to reach walls and shelving edges, reducing manual touch-ups along aisles.

Adaptive cleaning

Retracts the sweeping module when it detects wet spills and increases brush pressure on stubborn stains.

Dual-agent auto dosing

Two detergent tanks (about 7 L total) dosed in millilitre increments to match floor conditions.

Quick maintenance

Automatic disc-brush attachment and snap-on consumables. Published material puts routine maintenance under a minute.

Ride-on mode

A fold-out platform lets staff drive the robot manually for mapping and long transits between areas.

Specifications

In this series: BG1 Pro.

Cleaning capabilities	Sweeper-scrubber integration, dust mopping (optional), polishing (optional), edge scrubbing, automatic dual-agent dosing
Dimensions	1195 × 760 × 1303 mm with squeegee (47.0 × 29.9 × 51.3 in); 1120 × 660 × 1303 mm without
Weight	Approx. 344 kg (758 lb)
Battery	90 Ah on a 48 V platform (equivalent to 180 Ah at 24 V)
Charging time	About 3 h (AC ≥ 180 V) · about 4.5 h (AC ≤ 180 V)
Run-time	Sweeping & scrubbing up to 7.5 h
Cleaning width	550 mm scrub · 708 mm with side brushes (21.7 / 27.9 in)
Cleaning performance	Covered mode max 2,000 m²/h (21,530 ft²/h) · Spot mode max 6,000 m²/h
Water tanks	Clean 75 L (19.8 gal) · Waste 60 L (15.9 gal)
Debris bin	5 L
Detergent tanks	Dual tanks, approx. 7 L total
Navigation	LiDAR + 3D VSLAM fusion positioning
Cruising speed	0.2–1.0 m/s (0.66–3.28 ft/s)
Min. path clearance	85 cm (33.5 in)
Communication	4G, Wi-Fi, Bluetooth, elevator communication (optional)
Unattended operation	Supported with optional charging dock / workstation

Where it belongs

Supermarkets, grocery stores and shopping malls
Warehouses and distribution centers with open aisles
Convention centers, event venues and studio floors
Large office, school and campus common areas

What changes for the operator

Replaces the separate sweep-then-scrub routine on large floors with a single autonomous pass.
Large tanks and long run-time mean fewer interruptions per shift.
Edge scrubbing cuts the manual detail work that usually follows a ride-on scrubber.
The optional station handles water and charging so the robot is ready for every scheduled run.

Inside the BG1 series

BG1 and BG1 Pro share the same cleaning platform, tanks, run-time and station. The Pro adds 3D LiDAR (versus LiDAR) fused with 3D VSLAM and a 1.2 m/s top speed (versus 1.0 m/s).

Compared	BG1	BG1 Pro
Navigation	LiDAR + 3D VSLAM	3D LiDAR + 3D VSLAM
Cruise speed	0.2–1.0 m/s	0.2–1.2 m/s
Positioned for	Open commercial floors	Vehicle traffic, high ceilings, night operation
Cleaning system, tanks, run-time	Identical	Identical

The rest of the lineup

CC1 Pro autonomous cleaning robot, white body with lime side panel

CC1 series

See it in your building.

Find out whether BG1 fits the site. We walk the route, check the floor, access and service requirements, and quote an installation built around the work.