The robots we install in New York.
Compact 4-in-1 cleaners for corridors and elevators, large scrubber-dryers for open indoor floors, dry sweepers for large venues and garages, and outdoor sweepers sized for building sidewalks or wider municipal routes. Every model here is installed, programmed and serviced by CitySync.
CC1 series
CC1 Pro
The CC1 Pro is a versatile 4-in-1 cleaning robot that sweeps, scrubs, vacuums and dust-mops. AI spot scrubbing adjusts cleaning intensity to the floor, while optional docking automates charging and water management.
MT1 series
MT1, MT1 Vac, MT1 Max
Three dry-cleaning robots on one platform: MT1 sweeps large indoor venues, MT1 Vac adds vacuuming and dust mopping for carpet and hard floors, and MT1 Max is sealed and sensored for outdoor and semi-outdoor areas.
MT1 series
MT1
Professional dry sweeping for big indoor venues, from fine dust to bottles and leaves.
MT1 series
MT1 Vac
Sweeps, vacuums and dust-mops carpet and hard floors with twin-fan suction and HEPA-grade filtration.
MT1 series
MT1 Max
IP54-rated sweeping with 3D LiDAR for parking garages, courtyards, loading areas and transit hubs.
| Compared | MT1 | MT1 Vac | MT1 Max |
|---|---|---|---|
| Cleaning | Sweeping | Sweeping, vacuuming, dust mopping | Sweeping |
| Floors | Hard floors | Carpet and hard floors | Hard surfaces |
| Environment | Indoor (IPX3) | Indoor | Outdoor & semi-outdoor (IP54) |
| Navigation | VSLAM + Marker + LiDAR SLAM | VSLAM + Marker + LiDAR SLAM | VSLAM + Marker + 3D LiDAR SLAM |
| Max covered cleaning | 1,800 m²/h | 1,400 m²/h | 2,200 m²/h |
| Run-time | 4–8 h | 3–6.5 h | 5–10 h |
| Capacity | 35 L bin | 14 L dust bags + 6 L bin | 35 L bin |
| Weight | 65 kg | 75 kg | 85 kg |
BG1 series
BG1, BG1 Pro
BG1 and BG1 Pro share the same cleaning platform, tanks, run-time and station. The Pro adds 3D LiDAR (versus LiDAR) fused with 3D VSLAM and a 1.2 m/s top speed (versus 1.0 m/s).
BG1 series
BG1
Sweeps and scrubs in one pass with 75 L of clean water, built for large open floors.
BG1 series
BG1 Pro
The BG1 platform with 3D LiDAR perception and a higher cruise speed for complex, high-traffic sites.
| Compared | BG1 | BG1 Pro |
|---|---|---|
| Navigation | LiDAR + 3D VSLAM | 3D LiDAR + 3D VSLAM |
| Cruise speed | 0.2–1.0 m/s | 0.2–1.2 m/s |
| Positioned for | Open commercial floors | Vehicle traffic, high ceilings, night operation |
| Cleaning system, tanks, run-time | Identical | Identical |
Solis series
S100, S200
Two outdoor sweepers for different route scales. The S100 is the more compact option for building frontages and sidewalks. The S200 is built for wider paved routes, with adjustable 1.5–1.9 m sweeping width and a 150 L hopper. A walkthrough determines which machine fits the route and where it can be serviced.
Solis series
S100
A compact autonomous sweeper that keeps sidewalks and building frontages clean, with a 1 m sweeping path and onboard water and debris handling.
Solis series
S200
A wide-route sweeper with adjustable 1.5–1.9 m brush coverage, an 8-hour run and automatic hopper dumping.
| Compared | S100 | S200 |
|---|---|---|
| Role | Sidewalks and building frontages | Wider municipal and property routes |
| Sweeping width | 1,000 mm | 1.5–1.9 m |
| Sweeping rate | 5,000 m²/h | 5,000–10,000 m²/h |
| Hopper | 50 L | 150 L, with automatic dumping |
| Water | 20 L | 100 L |
| Run-time | About 3 h | 8 h |
| Weight | 350 kg | 750 kg |
| With a person | Autonomous operation, with manual driving available | Full autonomous operation, with optional crew collaboration using a backpack blower |
Not sure which robot
fits your building?
Request a walkthrough. We measure the paths, check the elevator and tell you which robot belongs — or that none of them does.
Floors
Drag the elevator anywhere. Push it to the edge to tuck it away.