MT1 series

MT1 Max

IP54-rated sweeping with 3D LiDAR for parking garages, courtyards, loading areas and transit hubs.

IP54Dust and splash sealed
3D LiDARVehicle & pedestrian avoidance
10 hMax run-time

Request a Walkthrough

MT1 Max outdoor sweeping robot with 3D LiDAR and warning light mast

MT1 Max sweeping a parking garage with its warning light illuminated

Overview

What this robot is for

The MT1 Max takes the MT1 sweeping system outdoors and into semi-outdoor spaces. 3D LiDAR plus multi-sensor fusion handle high ceilings, night operation and moving vehicles; IP54 sealing, a 1.2 m warning light, speed-bump capability and a 60 Ah battery with 5–10 hours of run-time make it the lineup's answer for garages, plazas and station concourses.

Floors. Hardened outdoor and indoor surfaces: concrete, epoxy, masonry, tile.

Capabilities

3D perception

3D LiDAR and multi-sensor fusion for accurate mapping under high ceilings, at night and in heavy interference.

Dynamic vehicle avoidance

Stops to let vehicles pass, pauses at lane entrances or edges aside while keeping the route clear.

Built for the weather it is rated for

IP54 sealing, water-drop sensing that moves the robot to a safe zone, operation from −10 °C to 45 °C. Not for extreme weather.

Crosses speed bumps

Handles 20 mm obstacles and common speed bumps below 50 mm, plus slopes to 8° in transit.

Automatic filter cleaning

Self-cleans its filter for a closed loop of operation and maintenance.

Auto-empty station (optional)

Shares the MT1 station: empties into an on-site bin and returns to the route.

Specifications

In this series: MT1, MT1 Vac.

Cleaning capabilities	Sweeping (dry)
Dimensions	840 × 600 × 675 mm (33 × 23.6 × 26.6 in)
Weight	85 kg (187 lb)
Battery	60 Ah
Charging time	< 3.5 h
Run-time	5–10 h · standard mode 8 h
Cleaning width	70 cm (27.6 in) with side brush
Cleaning performance	Covered max 2,200 m²/h (23,680 ft²/h) · Spot max 7,000 m²/h
Debris bin	35 L (9.25 US gal)
Navigation	VSLAM + Marker + 3D LiDAR SLAM
Cruising speed	0.2–1.2 m/s (adjustable)
Min. passage width	75 cm
Obstacle / slope	20 mm obstacles or speed bumps below 50 mm · 8° slope
Operating temperature	−10 °C to 45 °C (charging 0 °C to 40 °C)
Ingress protection	IP54
Noise	< 75 dB(A)
Applicable floors	Polished concrete, epoxy, rubber, masonry, ceramic tile and other hardened floors
Communication	4G, Wi-Fi, Bluetooth, LoRa or 2.4G (optional)
Unattended operation	Automatic charging with station; optional auto-empty station

Where it belongs

Parking garages and loading docks
Airports, railway and bus stations
Residential courtyards, plazas and covered walkways
Outdoor areas of campuses, studios and event venues

What changes for the operator

Extends automation to the areas most crews dread: garages, perimeters and plazas.
Operates alongside vehicle and pedestrian traffic with visible warning lighting.
Long run-time and auto-empty option cover large footprints with minimal intervention.

Inside the MT1 series

Three dry-cleaning robots on one platform: MT1 sweeps large indoor venues, MT1 Vac adds vacuuming and dust mopping for carpet and hard floors, and MT1 Max is sealed and sensored for outdoor and semi-outdoor areas.

Compared	MT1	MT1 Vac	MT1 Max
Cleaning	Sweeping	Sweeping, vacuuming, dust mopping	Sweeping
Floors	Hard floors	Carpet and hard floors	Hard surfaces
Environment	Indoor (IPX3)	Indoor	Outdoor & semi-outdoor (IP54)
Navigation	VSLAM + Marker + LiDAR SLAM	VSLAM + Marker + LiDAR SLAM	VSLAM + Marker + 3D LiDAR SLAM
Max covered cleaning	1,800 m²/h	1,400 m²/h	2,200 m²/h
Run-time	4–8 h	3–6.5 h	5–10 h
Capacity	35 L bin	14 L dust bags + 6 L bin	35 L bin
Weight	65 kg	75 kg	85 kg

The rest of the lineup

CC1 Pro autonomous cleaning robot, white body with lime side panel

CC1 series

See it in your building.

Find out whether MT1 Max fits the site. We walk the route, check the floor, access and service requirements, and quote an installation built around the work.