MT1 series

MT1

Professional dry sweeping for big indoor venues, from fine dust to bottles and leaves.

35 LDebris bin
70 cmPractical sweeping width
8 hMax run-time

Request a Walkthrough

MT1 sweeping robot in a dark warehouse corridor

Overview

What this robot is for

The MT1 is a dedicated indoor sweeping robot designed for venues up to 100,000 m². Dual disc brushes feed a roller brush and a 35 L bin, negative-pressure ventilation keeps dust contained, and AI trash recognition lets it target debris on patrol instead of sweeping blindly.

Floors. Hard indoor floors: polished concrete, epoxy, rubber, masonry and tile.

Capabilities

No debris too big or small

Dual disc brushes handle leaves and bottles while still picking up fine dust and dirt.

Active dust control

High-flow negative-pressure ventilation and an efficient filter trap particles in the debris box to prevent secondary pollution.

AI trash recognition and spot cleaning

Cameras identify debris in real time; on patrol routes the robot navigates to what it sees.

Designed for big venues

Rated for areas up to 100,000 m² with up to 1,800 m²/h covered cleaning.

Auto-empty station (optional)

Heads to the station, empties into an on-site bin and resumes cleaning without staff involvement.

Elevator integration

Autonomously calls and rides elevators enabling multi-floor routes without staff intervention.

Specifications

In this series: MT1 Vac, MT1 Max.

Cleaning capabilities	Sweeping (dry)
Dimensions	840 × 600 × 490 mm (33.1 × 23.6 × 19.3 in)
Weight	65 kg (143 lb)
Battery	45 Ah
Charging time	< 3 h
Run-time	4–8 h depending on cleaning level
Cleaning width	Approx. 70 cm including side brushes
Cleaning performance	Max 1,800 m²/h standard (19,380 ft²/h) · Max 6,000 m²/h spot cleaning
Debris bin	35 L (1.2 ft³)
Navigation	VSLAM + Marker + LiDAR SLAM
Cruising speed	0.2–1.2 m/s (adjustable)
Min. passage width	75 cm
Obstacle / gap / slope	20 mm obstacle · 30 mm gap · 8° slope
Noise	< 75 dB(A)
Ingress protection	IPX3 (indoor use only)
Applicable floors	Polished concrete, epoxy, rubber, masonry, ceramic tile and other hardened floors
Communication	4G, Wi-Fi, Bluetooth, LoRa or 2.4G (optional)
Unattended operation	Automatic charging with station; optional auto-empty station

Where it belongs

Warehouses and distribution centers
Manufacturing floors and workshops
Convention centers, arenas and exhibition halls
Transit stations, malls and large campuses

What changes for the operator

Removes the daily broom-and-dustpan pass from very large hard-floor areas.
Dust containment keeps air quality acceptable in occupied warehouses and venues.
Patrol-and-spot-clean behaviour keeps high-traffic zones tidy between full passes.
Auto-empty station option means the bin is not a labour bottleneck.

Inside the MT1 series

Three dry-cleaning robots on one platform: MT1 sweeps large indoor venues, MT1 Vac adds vacuuming and dust mopping for carpet and hard floors, and MT1 Max is sealed and sensored for outdoor and semi-outdoor areas.

Compared	MT1	MT1 Vac	MT1 Max
Cleaning	Sweeping	Sweeping, vacuuming, dust mopping	Sweeping
Floors	Hard floors	Carpet and hard floors	Hard surfaces
Environment	Indoor (IPX3)	Indoor	Outdoor & semi-outdoor (IP54)
Navigation	VSLAM + Marker + LiDAR SLAM	VSLAM + Marker + LiDAR SLAM	VSLAM + Marker + 3D LiDAR SLAM
Max covered cleaning	1,800 m²/h	1,400 m²/h	2,200 m²/h
Run-time	4–8 h	3–6.5 h	5–10 h
Capacity	35 L bin	14 L dust bags + 6 L bin	35 L bin
Weight	65 kg	75 kg	85 kg

The rest of the lineup

CC1 Pro autonomous cleaning robot, white body with lime side panel

CC1 series

See it in your building.

Find out whether MT1 fits the site. We walk the route, check the floor, access and service requirements, and quote an installation built around the work.