CC1 series

CC1 Pro

Sweeps, scrubs, vacuums and dust-mops small and medium spaces, then docks and recharges itself.

4-in-1Sweep · scrub · vacuum · dust mop
70 cmMinimum path clearance
9 hSilent mopping run-time

Request a Walkthrough

CC1 Pro autonomous cleaning robot, white body with lime side panel

Two CC1 Pro robots cleaning the floor of a bright supermarket aisle

Overview

What this robot is for

The CC1 Pro combines sweeping, scrubbing, carpet vacuuming and dust mopping in one compact robot. At 70 cm minimum path clearance and with optional elevator control, it is the natural fit for lobbies, corridors, offices and residential common areas across multiple floors.

Floors. Terrazzo, marble, tile, epoxy, sandstone, artificial stone and short-pile hard carpet.

Capabilities

4-in-1 versatile cleaning

Sweeping, scrubbing, (carpet) vacuuming and dust mopping in a single machine, with modular cleaning components that swap in about a minute.

AI spot scrubbing

Detects dirty floors in real time and adjusts cleaning intensity to the stain, rather than running the same pass everywhere.

Elevator integration

Autonomously calls and rides elevators enabling multi-floor routes without staff intervention.

Auto charging, refill and drainage

With the optional docking station the robot recharges, refills clean water and drains waste on its own. A 30 L / 30 L mobile tank option avoids plumbing work.

Compact and quiet

629 × 552 × 695 mm, 75 kg and under 70 dB, so it can run while a building is occupied.

Cleaning reports

Waste hotspot maps, cleaning-performance heatmaps and an operations dashboard in the manufacturer’s app.

Specifications

Cleaning capabilities	Sweeping, (carpet) vacuuming, dust mopping, scrubbing
Dimensions	629 × 552 × 695 mm (24.8 × 21.7 × 27.4 in)
Weight	75 kg (165 lb)
Battery	50 Ah LiFePO₄
Charging time	About 3 h
Run-time	Scrubbing 5 h · Sweeping & vacuuming 5 h · Carpet vacuuming 4 h · Silent mopping 9 h
Cleaning width	500 mm (19.7 in) with side brush
Cleaning efficiency	700–1,000 m²/h covered (7,530–10,760 ft²/h) · 1,500–3,000 m²/h spot cleaning
Water tanks	Clean 15 L · Dirty 15 L
Dustbin	2.5 L, or 6 L with dust bag
Navigation	LiDAR + visual fusion positioning
Cruising speed	0.2–1.2 m/s (adjustable)
Min. path clearance	70 cm (27.6 in)
Threshold / slope	20 mm threshold and 8° slope in transit; 8 mm and 3° while cleaning
Noise	< 70 dB
Ingress protection	IPX4
Display	10.1-inch LCD
Communication	4G, Wi-Fi, Bluetooth, elevator control (optional)
Unattended operation	Auto charging and water refill/drain with optional docking station

Where it belongs

Residential lobbies, corridors and amenity floors
Office buildings and commercial common areas
Hotels, schools and clinics with mixed hard floor and short-pile carpet
Multi-floor buildings using elevator integration

What changes for the operator

One machine covers routine sweeping, scrubbing and vacuuming so a single deployment replaces several manual tasks.
Runs scheduled routes overnight or during occupied hours without an operator present.
Fits standard doorways and elevators, so it scales across floors rather than being confined to one area.
Docking station closes the loop on charging and water so staff time is limited to periodic checks.

The rest of the lineup

MT1 series

See it in your building.

Find out whether CC1 Pro fits the site. We walk the route, check the floor, access and service requirements, and quote an installation built around the work.