Solis series

S200

A wide-route sweeper with adjustable 1.5–1.9 m brush coverage, an 8-hour run and automatic hopper dumping.

  • 1.9 mMax sweeping width
  • 8 hRun-time
  • 150 LHopper
S200 autonomous outdoor sweeper, front view, with four side brushes

Overview

What this robot is for

The S200 is built for longer, wider paved routes where a compact sidewalk machine is not enough. Four side brushes and a V-shaped roller sweep a path that adjusts from 1.5 to 1.9 m, while a 150 L hopper and 100 L water tank support extended operation. It plans outdoor routes, can resume after an interruption, and can work autonomously or alongside a crew member using a backpack blower. The machine also handles automatic charging, water refill and hopper dumping. CitySync evaluates route width, turning space, grades and service access before recommending a 750 kg sweeper.

Floors. Paved outdoor surfaces, including municipal sidewalks, side roads, plazas and promenades.

Capabilities

A wide-area sweeping system

A V-shaped roller brush works with four side brushes to collect dust, sand, leaves, paper, cartons, cans and small bottles. The brush span adjusts from 1.5 m to 1.9 m, with real-time edge detection for close-to-edge cleaning.

Capacity for longer routes

A 150 L hopper and 100 L water tank support extended outdoor runs. The machine detects when the hopper is full and dumps automatically, while water refill and charging are handled as part of its unattended operation.

Route planning that can pick up again

SLAM path planning maps the outdoor route. If a run is interrupted, the S200 remembers where it stopped and resumes from that point. Rain avoidance allows it to leave the route when weather conditions change.

Autonomy or crew collaboration

The S200 supports complete-coverage autonomous routes as well as human-robot collaboration. A crew member can work alongside it with a backpack blower, then hand the route back to the machine.

Sensing across the route

Multi-line LiDAR, ultrasonic sensors and cameras provide a 360° sensing array for outdoor navigation. The machine is specified to handle grades up to 12°.

A machine that needs a site check

The S200 weighs 750 kg and measures 2,390 × 1,360 × 1,730 mm, with a maximum width of 1,900 mm when the side brushes are extended. CitySync checks route width, turning space, grades and service access before installation.

Specifications

In this series: S100.

Cleaning capabilitiesOutdoor sweeping. V-shaped roller brush and four side brushes
Dimensions2,390 × 1,360 × 1,730 mm (94.1 × 53.5 × 68.1 in)
Maximum width1,900 mm (74.8 in) with side brushes out
Weight750 kg (1,653 lb)
Sweeping width1.5–1.9 m, brushes adjust to the path
Sweeping rate5,000–10,000 m²/h (53,820–107,640 ft²/h)
Hopper150 L (39.6 gal), with overflow detection and automatic dumping
Water tank100 L (26.4 gal), refilled automatically
Run-time8 h
Gradeability12°
NavigationSLAM path planning · multi-line LiDAR, ultrasonic sensors and cameras
Driving modesComplete-coverage autonomy, or human-robot collaboration with a backpack blower
WeatherRain avoidance
AppSituation report, scheduled cleaning, one-tap recall, targeted cleaning, automatic zone management
Unattended operationAutomatic charging, water refilling and hopper dumping

Where it belongs

  • Municipal sidewalk and side-road routes
  • Wide plazas and promenades where a 1.9 m sweeping width fits
  • Large residential and commercial frontages that exceed the practical scope of the S100
  • Paved sanitation routes that benefit from an 8-hour run and 150 L hopper

What changes for the operator

  • Adjustable 1.5–1.9 m brush coverage can handle broad paved routes while adapting to the available width.
  • The 150 L hopper and automatic dumping reduce the need for manual emptying during a route.
  • An 8-hour run-time, automatic water refill and charging support longer operating schedules with fewer routine interruptions.
  • Route memory helps the machine resume after an interruption, while a crew member can also work alongside it with a backpack blower.

Inside the Solis series

Two outdoor sweepers for different route scales. The S100 is the more compact option for building frontages and sidewalks. The S200 is built for wider paved routes, with adjustable 1.5–1.9 m sweeping width and a 150 L hopper. A walkthrough determines which machine fits the route and where it can be serviced.

ComparedS100S200
RoleSidewalks and building frontagesWider municipal and property routes
Sweeping width1,000 mm1.5–1.9 m
Sweeping rate5,000 m²/h5,000–10,000 m²/h
Hopper50 L150 L, with automatic dumping
Water20 L100 L
Run-timeAbout 3 h8 h
Weight350 kg750 kg
With a personAutonomous operation, with manual driving availableFull autonomous operation, with optional crew collaboration using a backpack blower

See it in your building.

Tell us about the route. We’ll survey the width, turning space, grades, surface and where the machine can charge, refill and dump. At 750 kg, this is not a machine to guess on from a map—we’ll confirm the S200 is a fit before recommending it.